Equipment for the Electronic Industry
A wide range of equipment for the Electronic Industry

We offer a full line of solutions for the electronic and semi-conductor industry, Equipment for Automatic Component Insertion, Equipment for Surface Mount, and Equipment for Assembly of Large Odd Components. Likewise, we complement our provision with PCB conveyors and handling systems, Magazine loaders and unloaders, etc.

High versatility in small space

Fuzion Platforma
For electronics manufacturers who demand an agile, flexible production model without limitations, Fuzion® is the pinnacle of platform performance. Fuzion is the industry’s most adaptable and capable platform, delivering profitable productivity for any manufacturing model from NPI to ultra-high volumes. Fuzion drives operational excellence, enabling manufacturers to build any product at any time, accelerate new product introduction and ramp to volume, and maximize utilization, quality, and yield.
- 1 and 2-beam variants
- Extra-capacity (XC) models with up to 272 feeder inputs
- Versatile multi-task odd-form (OF) model
- Throughput up to 66,500 cph per module
- Industry-leading cost per placement, flexibility and accuracy
- Largest board size capability
- Closed-loop processes to ensure the highest yields
- Maximum performance and utilization for any volume/product mix
- Comprehensive toolset to accelerate NPI and achieve 100% first-pass yield
- Ability to prototype on a single module
- Lowest cost of operation and ownership

Plataforma FuzionOF
FuzionOF™ features the highest available odd-form automation throughput to reduce cycle times and eliminate bottlenecks. It handles a full range of standard SMT and non-traditional components up to 150mm square and up to 40mm tall, with 5kg placement force. With the most complete range of component handling and input types, a wide variety of standard tooling, and custom design and implementation services, FuzionOF addresses virtually any odd-form application. It also incorporates precise, repeatable, closed-loop processes that reduce defects, rework and waste. FuzionOF transforms back-end assembly into a strategic advantage.
- Single-beam platform with throughput up to 16,500 cph
- Full range of SM components to pin-in-paste and all odd parts in between
- 0201 – 55mm square (SFoV) and 150mm square (MFoV)
- Components up to 33mm tall, up to 5kg placement force
- Adjustable gripper and full array of odd-form nozzles; broad tooling portfolio
- Highest online capacity, widest range of feeder input types
- Improve output and yields vs. manual assembly; accelerate ROI with rapid payback

UFlex Automation Platform
The Uflex™ flexible automation platform provides exclusive value by breaking traditional automation barriers. It features a small footprint and delivers cost-effective automation by quickly transitioning to a comprehensive array of standard and third-party tooling, as well as numerous feeding options, to perform virtually any automation task. Uflex supports up to four high-speed vacuum spindles or three high-speed pneumatic grippers. It offers investment protection versus custom cells designed for a single task, and can lower the cost per insertion by more than 95% versus manual assembly process while substantially improving quality and yields.
- Radial and axial insertion
- 2K to 3K insertions per hour is typical
- Large-part support up to 60mm tall, 50mm diameter, 1 lb in weight
- Easily reconfigured for other operations
- Add Uflex cells to enhance capability
- Dispensing, screw driving, labeling, test handling, and more

Omni Inserter
Universal Instruments’ Value Series brings cost-effective intelligence, ease of use and simplicity to back-end electronics assembly automation. The Omni™ Inserter leverages a linear-motor positioning system and a host of intelligent features to deliver accurate, high-speed insertion of axial, radial and other odd-form components. It supports a range of feeder types, and features an active clinch and controlled insertion force.
- Four independent insertion heads with standard active clinch
- High-force & programmable insertion modes; force monitoring
- Four upward-looking cameras utilizing AI & AOI vision algorithms
- Best-fit insertion algorithm
- CAD data import
- Independent pick & place sequences
- Portfolio of standard feeders; on-the-fly replenishment
- Board shuffle mode (available on belt conveyor configuration)

Radial 88 HTI
The Radial 88HTi offers consistently high throughput regardless of component type, with single-, dual-, triple-, and quad-span insertion variants. Lead span capability up to 10mm virtually eliminates tedious manual assembly requirements to improve throughput, product quality and output per floor space, while reducing associated labor costs and time requirements to provide greater returns. The Radial 88HTi delivers exceptional flexibility with over 100 available inputs on the expandable sequencer. An intuitive operator interface that is common with other Generation 88HT equipment offers easy operation, diagnostics, data management and a graphical product editor.
- 22,000 CPH
- Highest reliability in the industry (300 ppm)
- Component replenishment without machine stoppage
- Manual Load or Automatic PCB Load/Unload
- Configurable sequencer (In-Line or Straight-Back)
- Multiple clinch options
- Component Verifier
- Simple-to-use operator environment with graphical user interface

VCD 88 HTI
For single-process sequencing and insertion of axial components and jumper wires, the VCD 88HTi delivers reliable productivity at the highest throughput rates in the industry. An error rate of less than 200 ppm is the result of Universal Instruments’ enduring lineage of through-hole development and leadership. Component changeover is minimized with over 220 available inputs on the expandable sequencer. An intuitive operator interface that is common with other Generation 88HTi equipment offers easy operation, diagnostics, data management and a graphical product editor.
- 24,500 CPH
- Highest “real” throughput axial sequencer/inserter
- Highest reliability in the industry (200 ppm)
- Component replenishment without machine stoppage
- Expandable from 20 inputs up to 220 inputs
- Manual Load or Automatic PCB Load/Unload
- Component Verifier
- Simple-to-use operator environment with graphical interface

Jumper Wire 88
The Jumper Wire 88 inserts wire from bulk input packages into printed circuit boards with the flexibility to handle a wide range of wire spans without changing tooling. Exceptional outgoing board quality levels of 75ppm or better with high insertion speeds and zero wire scrap deliver superior price performance and yields. An intuitive operator interface that is common with other Universal Through-Hole equipment offers easy operation, diagnostics, data management and a graphical product editor.
- 33,000 CPH
- Zero Scrap – zero scrap leads
- Highest reliability in the industry (75 ppm)
- Programmable clinch angles 25° to 75° from vertical
- Manual Load or Automatic PCB Load/Unload
- Simple-to-use operator environment
- 5 to 33mm spans

Flexbond Hot Bar Bonding Platform
The Flexbond™ high-throughput hot bar bonding platform enables the first fully automated volume solution for advanced flex circuit and other hot bar interconnect applications. It combines with Universal Instruments’ Fuzion® Platform for full-process integration, including flux transfer, high-accuracy placement and hot bar soldering.
These configurable solutions have been shown to provide 6X to 12X the throughput of traditional semi-automated assembly stations and more than twice that of alternative automated hot bar solutions while reducing floor space requirements by 80%. They also require significantly fewer machines and offer the lowest OPEX and $/cph/m2.
- The first high-throughput automated hot bar bonding platform
- Industry-best performance and a maximum bonding rate of 1800 UPH
- Dual-zone parallel processing with up to 6 heads per zone, 12 heads total (4X alternative solutions)
- Programmable, closed-loop temperature control ensures alignment with solder profiles
- Under-board constant heat balances thermal load for flex-to-flex applications
- Programmable pressure settings and high-accuracy management provide superior bonding control
- Conveyor-style architecture with adjustable width adapts to range of applications

Single magazine line loader
The GENIUS 1-SL Single Magazine line loaderis used when a magazine of PC boards needs to be loaded into a production line. This unit is capable of handling one magazine that can easily be accessed from the front of the machine. It is used in low volume applications or bottom side process with a single magazine.
STANDARD FEATURES
- • User friendly touchscreen display for function
- and alarm message
- • Electrical pusher to slide PCBs automatically
- out of magazine
- • Magazine locking by upper and lower
- manual clamps
- • Programmable pitch setting
- • Tower light display and alarm for machine
- status
- • SMEMA interface
- • ESD transparent windows
- • ESD hinged cover with safety interloc

Multi magazine line loader
The GENIUS 1-ML Multi magazine line loader is used when a magazine of PC boards is required to be loaded into a production line. This unit is capable of handling five magazines that can easily be accessed from the side of the machine. It is used in high volume applications that require large capacity storage.
STANDARD FEATURES
- • 5 magazine capacity for standard machine
- • Electrical pusher to slide PCBs automatically
- out of the magazine
- • Rack locking by upper and lower pneumatic
- clamps
- • Programmable pitch setting
- • User friendly touch screen display for function
- and alarm message
- • Tower light display and alarm for machine
- status
- • SMEMA interface
- • ESD transparent windows

Destacker
The GENIUS 1-DK Destacker is used when unpopulated PC boards are to be introduced to a production line.
The module can hold up to 200 mm (7.8”) stack of unpopulated PC boards at a weight of 15 kg (33 lbs).
The unit is able to segregate one board from its stack onto the production line by utilizing a technically advanced releasing mechanism. The unit is able to achieve cycle time of approximately 10 seconds per board.
STANDARD FEATURES
- Large stack capacity
- Easy adjustment for PCB thickness
- Uninterrupted loading
- Motorized jog width adjust
- Adjustable conveyor speed
- Antistatic edge belts
- SMEMA interface

Edge belt conveyor
The GENIUS 1-EB-500 to 1-EB-1500 Edge belt conveyor is a cost effective solution to handle board buffering, indexing and standard board transfers. The unit is designed to be dependable and efficient transfer conveyor
STANDARD FEATURES
- Motorized jog width adjust
- Adjustable conveyor speed
- Operator inspect feature
- SMEMA interface
Optional
- ESD hinged cover with safety interlock
- Additional belt segment
- Cooling fan bank with support